exhaust flange cap nits

ballbreaker · 11-17-2021, 01:43 PM

Does anyone know the size of the chrome acorn flange nuts on a 1700 exhaust flange on a vaquero. Dealer wants $6.00 a nut. Thanks in advance. Parts list doesn't show size.

redjay · 11-17-2021, 02:30 PM

Likely 8mm diameter but you would have to find out the pitch.

I think for an 8mm bolt its 1.25 mm for a regular thread and 1.00 mm for fine thread. My guess is that 1.25mm is what you need.

ballbreaker · 11-17-2021, 04:06 PM

Thanks for the reply Redjay. Wanted to get them prior to removal as I won't be doing them until snow leaves. Dealer says he doesn't know the size as they haven't replaced any.

kpmhspirit · 11-17-2021, 07:34 PM

Quote:

Originally Posted by ballbreaker

Does anyone know the size of the chrome acorn flange nuts on a 1700 exhaust flange on a vaquero. Dealer wants $6.00 a nut. Thanks in advance. Parts list doesn't show size.

I found this

https://www.bikebandit.com/oem-parts...5351#sch797065

https://www.bikebandit.com/oem-parts...351&sch=797065

It's 8mm but doesn't give the pitch. My guess is 1.25mm too. It's not a fine thread from what I remember.

Chuck A. · 11-17-2021, 10:11 PM

Most part stores have a studded board by there screw/nut section. Try the nut on it for size/pitch.

ballbreaker · 11-18-2021, 03:59 PM

Thanks to all that have replied with the info.

11-17-2021, 01:43 PM	#1
ballbreaker Member Join Date: Dec 2013 Location: canada Posts: 487	exhaust flange cap nits Does anyone know the size of the chrome acorn flange nuts on a 1700 exhaust flange on a vaquero. Dealer wants $6.00 a nut. Thanks in advance. Parts list doesn't show size. Login or Register to Remove Ads
	0

11-17-2021, 10:11 PM	#5
Chuck A. Advanced Member Join Date: Apr 2014 Location: Hartselle Alabama Posts: 995	Most part stores have a studded board by there screw/nut section. Try the nut on it for size/pitch. __________________ Have A Good One, Chuck Patriot Guard Riders Sons Of Liberty Riders Alabama Road Captain 2015 Voyager 2003 1500 NOMAD FI sold 6/19 VBA #2993 RUSSELL DAYLONG SEATS ROCK!! DAMMIT TOOL: Any handy tool that you grab and throw across the garage while yelling "DAMMIT" at the top of your lungs There is no substitute for laminar flow in which a helmet is the primary disturbance. SO MANY ROADS, SO LITTLE TIME. Login or Register to Remove Ads
	0

11-17-2021, 02:30 PM	#2
redjay Top Contributor Join Date: Feb 2008 Location: Ontario Posts: 6,982	Likely 8mm diameter but you would have to find out the pitch. I think for an 8mm bolt its 1.25 mm for a regular thread and 1.00 mm for fine thread. My guess is that 1.25mm is what you need.
	0

11-17-2021, 04:06 PM	#3
ballbreaker Member Join Date: Dec 2013 Location: canada Posts: 487	Thanks for the reply Redjay. Wanted to get them prior to removal as I won't be doing them until snow leaves. Dealer says he doesn't know the size as they haven't replaced any.
	0

11-18-2021, 03:59 PM	#6
ballbreaker Member Join Date: Dec 2013 Location: canada Posts: 487	Thanks to all that have replied with the info.
	0