|
03-16-2013, 01:52 PM | #1 |
Advanced Member
Join Date: Dec 2011
Location: Rockland,ont
Posts: 519
|
New thunder air kit installed with my custom touch
The thunder kit is not designed to easily remove the filter. You have to reach behind the throttle body plate and removed the nuts which are a pain of the @#$$% location.
I drilled and tapped two new spacers screwed them into the back plate and then drilled two holes on the outside cover . I then placed two countersunk screws into the spacers. I then placed the second chrome cover again drilled and tapped three new holes to hold the plate in place. The outside chrome screws are hidden by the emblem cover but can be easily remove for cleaning now.. This mod that I designed is highly recommend for those that have purchased the Thunder air kit with no front screw access. Cheers
__________________
Lukster National CVFR SAA Rockland,Ont Nomad 2010 Voyager trunk Alleycat intake / YVANIZE ECU, Freedom performance 2 into 1 Kuryaken grip with Throttle mod lost of chrome add on Sound digital 1200.4 2 ohm 6 x 9 MPX 690 Hertz in custom fairing 6.5 hcx hertz speakers in hard bags 6.5 MPX hertz in pods Login or Register to Remove Ads
Last edited by Vulcanrider03; 03-16-2013 at 01:55 PM.
|
|