RumblingPride Flags.....

**trip** · 09-20-2009, 09:19 AM

Well, finally got my flags and posts from Rumbling Pride installed. Cost me 80 bucks for the mounting system and American Flag. I purchased the 7 1/2" flag poles. Install was a snap.

jonsamson · 09-20-2009, 10:52 AM

Looks good.

dabull · 09-20-2009, 02:42 PM

hey Trip...those look great! Are those the 22 or 45 degree angle flags/brackets??

and after looking at the RP pics, can we install either?

socwkbiker · 09-20-2009, 04:13 PM

Very cool!

pirate · 09-20-2009, 06:47 PM

Looks great!

**trip** · 09-20-2009, 08:41 PM

Quote:

Originally Posted by DaBull

hey Trip...those look great! Are those the 22 or 45 degree angle flags/brackets??

and after looking at the RP pics, can we install either?

Actually, I believe they are both, Dabull. You can use these brackets if you have a leaning license plate or straight.

dabull · 09-20-2009, 08:44 PM

Quote:

Originally Posted by Trip

Quote:

Originally Posted by DaBull

hey Trip...those look great! Are those the 22 or 45 degree angle flags/brackets??

and after looking at the RP pics, can we install either?

Actually, I believe they are both, Dabull. You can use these brackets if you have a leaning license plate or straight.

thx Trip

Are those bullet tips going to rattle against the lggage rack? Looks like they are right on it???

skimo · 09-20-2009, 08:49 PM

Quote:

Originally Posted by DaBull

hey Trip...those look great! Are those the 22 or 45 degree angle flags/brackets??

and after looking at the RP pics, can we install either?

He's got the post mounted it the top which is the 22 degree angle, the 45 is the mounting hole on the side of the mount were the little black bullet (which is actually the post tip} is located. The mount has both 22 and 45 degree mounting The little cone bullet shaped thing is just the mast tip and they come in black or chrome. They are used as mast tip or as a plug to the additional hole the the mount. The nice thing about them is if you want to pull the flags, just get a couple extra tips and you can plug the holes up. The tips are just plastic that thread on the the plastic (nylon) mast. To mount the tips in the hole of the mount it use a short piece of nylon all thread.

**trip** · 09-21-2009, 11:10 AM

Quote:

Originally Posted by DaBull

Quote:

Originally Posted by Trip

Actually, I believe they are both, Dabull. You can use these brackets if you have a leaning license plate or straight.

thx Trip

Are those bullet tips going to rattle against the lggage rack? Looks like they are right on it???

Nope....don't rattle a bit.

ccmjr77 · 09-21-2009, 12:39 PM

I want to get some of those, but with the trunk, I can not figure out where to mount them. I do not have a chrome rack on the trunk.

carolinakid1 · 10-08-2009, 05:51 PM

Trip, I have a 07 and I just bought the same "Touring" setup and wonder if I should have bought the "Cruiser" setup. I cannot tell from your picture what you have attached the flag bases to?

dkdixie · 10-09-2009, 04:47 AM

Trip's are mounted to license plate frame.

carolinakid1 · 10-09-2009, 06:57 AM

Wonder if he used the adhesive tape provided? It looks like some bolts may have been screwed into it from the back of the license plate.

Just trying to find a flat surface to attach to since the Nomad has all those beautiful curves. :-)

rksaw · 10-09-2009, 06:13 PM

Well, I just added that to my Christmas list!!!

**jestephens** · 10-09-2009, 08:31 PM

Those do look good

09-20-2009, 09:19 AM	#1
trip VBA Founder Join Date: Jun 2007 Location: Lindale, Texas Posts: 6,846	RumblingPride Flags..... Well, finally got my flags and posts from Rumbling Pride installed. Cost me 80 bucks for the mounting system and American Flag. I purchased the 7 1/2" flag poles. Install was a snap. __________________ Robert "Trip" Hilliard VBA/KawaNOW - Founder/Past President VBA # 00001 Trip's Website Custer 09, 18 / Maggie Valley 11 / Eureka Springs 09, 17 / Antlers 09, 10, 11, 13, 15, 16, 17, 18 Texas Hill Country / Deals Gap / Colorado / Wyoming / Montana / Utah / More trips for Trip Login or Register to Remove Ads
	0

09-20-2009, 10:52 AM	#2
jonsamson Member Join Date: Oct 2008 Posts: 209	RumblingPride Flags..... Looks good.
	0

09-20-2009, 02:42 PM	#3
dabull Sr. Member Join Date: Oct 2008 Location: Crestview, FL Posts: 2,409	RumblingPride Flags..... hey Trip...those look great! Are those the 22 or 45 degree angle flags/brackets?? and after looking at the RP pics, can we install either?
	0

09-20-2009, 04:13 PM	#4
socwkbiker Top Contributor Join Date: Jul 2007 Location: Jefferson City, MO Posts: 6,272	RumblingPride Flags..... Very cool! __________________ Jeff Platz VBA #0002 VBA VP-Global B.A.C.A. Hoss 2005 "StrongBear" Black/Silver Todd and BD
	0

09-20-2009, 06:47 PM	#5
pirate Sr. Member Join Date: May 2008 Location: North Dakota Posts: 1,865	RumblingPride Flags..... Looks great! Login or Register to Remove Ads
	0

09-21-2009, 12:39 PM	#10
ccmjr77 Advanced Member Join Date: Aug 2007 Location: Anthem, AZ Posts: 642	RumblingPride Flags..... I want to get some of those, but with the trunk, I can not figure out where to mount them. I do not have a chrome rack on the trunk. __________________ ccmjr77 2007 Kawasaki Nomad 1600
	0

10-08-2009, 05:51 PM	#11
carolinakid1 Advanced Member Join Date: Jul 2009 Location: Athens, GA Posts: 528	RumblingPride Flags..... Trip, I have a 07 and I just bought the same "Touring" setup and wonder if I should have bought the "Cruiser" setup. I cannot tell from your picture what you have attached the flag bases to? __________________ Mike Bryant "CarolinaKid" 2007 Candy Red/Titanium Nomad VBA # 1203 AMA # 1088875 VROC # 30589 Patriot Guard
	0

10-09-2009, 04:47 AM	#12
dkdixie Sr. Member Join Date: Nov 2007 Location: Blairsville in N. GA mountains Posts: 1,623	RumblingPride Flags..... Trip's are mounted to license plate frame. __________________ Dick Campbell Blairsville, GA 2008 Red & Black Nomad 1600 (retired) 2009 1900 Yamaha Stratoliner (retired) 2013 1900 Yamaha Stratoliner 2018 CanAm RT Limited Spyder (Sold) 2014 Goldwing Roadsmith Red Trike (Sold) 2019 Goldwing DCT Roadsmith Copper & Black Trike VBA #243 Darkside #115 Patriot Guard Rider American Legion Rider
	0

10-09-2009, 06:57 AM	#13
carolinakid1 Advanced Member Join Date: Jul 2009 Location: Athens, GA Posts: 528	RumblingPride Flags..... Wonder if he used the adhesive tape provided? It looks like some bolts may have been screwed into it from the back of the license plate. Just trying to find a flat surface to attach to since the Nomad has all those beautiful curves. :-) __________________ Mike Bryant "CarolinaKid" 2007 Candy Red/Titanium Nomad VBA # 1203 AMA # 1088875 VROC # 30589 Patriot Guard
	0

10-09-2009, 06:13 PM	#14
rksaw Sr. Member Join Date: Jul 2008 Location: Damascus, OR Posts: 1,430	RumblingPride Flags..... Well, I just added that to my Christmas list!!!
	0

10-09-2009, 08:31 PM	#15
jestephens Join Date: Jan 2009 Location: Fairview Heights, IL (StLouis) Posts: 1,601	RumblingPride Flags..... Those do look good __________________ Jay Stephens, Former National Vice President (2013-2015) 2006 Yamaha FJR1300 formerly 2011 Vaquero- Black formerly 2005 Nomad - black/silver
	0

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Some great flags for your bike	wompus	Vulcan Nomad/Vaquero/Voyager	11	06-21-2011 12:15 PM
Flags	lawznforzer	Parts & Accessories	9	10-18-2010 09:29 PM